Netgear WAB102 Wireless Access Point
The default factory settings for the A/B WAB102 WAP are:
| Feature |
Setting |
| User Name |
admin |
| Password |
1234 |
| WAP Name |
NetgearXXXXXX where the X's are the last six digits of the MAC |
| WAP IP Address |
192.168.0.226 |
| WAP netmask |
255.255.255.0 |
| SSID (A & B) |
Wireless |
| 11a RF Channel |
52 Non-Turbo Mode; 50 Turbo Mode |
| 11b RF Channel |
6 |
| WEP |
Disabled |
| Authentication Type |
Open System |
802.11a Encryption as needed
You can set up to four Encryption Keys, each of which can have a
different encryption level: 64, 128, or 152 bits.
The default setting indicates which key is used for encrypting
transmissions by the WAP. Other devices on the network must
have the same key value entered to receive these transmissions.
Other devices can be set to transmit back to the WAP using different
keys. As long as the WAP has the key listed, it can decrypt.
802.11b Encryption Security as needed
for 802.11b, you must have four encryption keys set and all
four keys must be the same encryption level: 64 or 128 bits.
|